2017-12-26 27 views
0

現在、Androidデバイス(7.1.1)のファイルシステムをブラウズ(および後でマウント)するためにobexツールを使用しようとしています。 obexftp -lを使ってリストしようとすると、何も返されません。私は、-lの後に可能な限りすべてのファイルパラメータの組み合わせを試しましたが、同じエラーが表示されます。私の最終的な目標はマウントにObexfsを使用することですが、これは中間的な足踏みであると感じています。以下の詳細。obexftp -lが失敗し、戻りコードが81

uname -r: 3.14.2-xilinx 

bluetoothd -v: 4.101 

bluetoothctl -v 5.47 

lsusb: Bus 001 Device 004: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0 

hcitool dev: hci0  5C:F3:70:82:XX:XX 

hciconfig -a: 
hci0: Type: BR/EDR Bus: USB 
    BD Address: 5C:F3:70:82:XX:XX ACL MTU: 1021:8 SCO MTU: 64:1 
    UP RUNNING PSCAN ISCAN 
    RX bytes:13146 acl:211 sco:0 events:382 errors:0 
    TX bytes:6265 acl:219 sco:0 commands:149 errors:0 
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
    Link policy: RSWITCH SNIFF 
    Link mode: SLAVE ACCEPT 
    Name: '312_BT-0' 
    Class: 0x000100 
    Service Classes: Unspecified 
    Device Class: Computer, Uncategorized 
    HCI Version: 4.0 (0x6) Revision: 0x1000 
    LMP Version: 4.0 (0x6) Subversion: 0x220e 
    Manufacturer: Broadcom Corporation (15) 

AndroidデバイスへのLinuxデバイスから成功したファイルのプッシュ: Androidデバイス上のファイル構造を一覧表示しようとすると

obexftp -b D4:63:C6:XX:XX:XX -B 6 -U none -p /home/root/test.txt 
Suppressing FBS. 
Connecting..\done 
Sending "/home/root/test.txt".../done 
Disconnecting..-done 

:btmonの

obexftp -b D4:63:C6:XX:XX:XX -B 6 -U none -l 
Suppressing FBS. 
Connecting..\done 
Receiving "(null)"...|failed: (null) 
The operation failed with return code 81 
Disconnecting../done 

出力しよう上記のobexftp -lコマンド:

= New Index: 5C:F3:70:82:XX:XX (Primary,USB,hci0)    [hci0] 0.316536 
< HCI Command: Create Connection (0x01|0x0005) plen 13   #1 [hci0] 3.563946 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
    Packet type: 0xcc18 
     DM1 may be used 
     DH1 may be used 
     DM3 may be used 
     DH3 may be used 
     DM5 may be used 
     DH5 may be used 
    Page scan repetition mode: R2 (0x02) 
    Page scan mode: Mandatory (0x00) 
    Clock offset: 0x0000 
    Role switch: Allow slave (0x01) 
> HCI Event: Command Status (0x0f) plen 4   #2 [hci0] 3.565628 
    Create Connection (0x01|0x0005) ncmd 1 
    Status: Success (0x00) 
> HCI Event: Role Change (0x12) plen 8   #3 [hci0] 5.392513 
    Status: Success (0x00) 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
    Role: Slave (0x01) 
> HCI Event: Connect Complete (0x03) plen 11   #4 [hci0] 5.414518 
    Status: Success (0x00) 
    Handle: 11 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
    Link type: ACL (0x01) 
    Encryption: Disabled (0x00) 
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2   #5 [hci0] 5.414709 
    Handle: 11 
> HCI Event: Command Status (0x0f) plen 4   #6 [hci0] 5.415523 
    Read Remote Supported Features (0x01|0x001b) ncmd 1 
    Status: Success (0x00) 
> HCI Event: Max Slots Change (0x1b) plen 3   #7 [hci0] 5.425523 
    Handle: 11 
    Max slots: 5 
> HCI Event: Link Supervision Timeout Changed (0x38) plen 4   #8 [hci0] 5.429522 
    Handle: 11 
    Timeout: 5000.000 msec (0x1f40) 
> ACL Data RX: Handle 11 flags 0x02 dlen 10   #9 [hci0] 5.432524 
    L2CAP: Information Request (0x0a) ident 2 len 2 
    Type: Extended features supported (0x0002) 
< ACL Data TX: Handle 11 flags 0x00 dlen 16   #10 [hci0] 5.432580 
    L2CAP: Information Response (0x0b) ident 2 len 8 
    Type: Extended features supported (0x0002) 
    Result: Success (0x0000) 
    Features: 0x000002b8 
     Enhanced Retransmission Mode 
     Streaming Mode 
     FCS Option 
     Fixed Channels 
     Unicast Connectionless Data Reception 
> HCI Event: Read Remote Supported Features (0x0b) plen 11   #11 [hci0] 5.438528 
    Status: Success (0x00) 
    Handle: 11 
    Features: 0xff 0xfe 0x8f 0xfe 0xd8 0x3f 0x5b 0x87 
     3 slot packets 
     5 slot packets 
     Encryption 
     Slot offset 
     Timing accuracy 
     Role switch 
     Hold mode 
     Sniff mode 
     Power control requests 
     Channel quality driven data rate (CQDDR) 
     SCO link 
     HV2 packets 
     HV3 packets 
     u-law log synchronous data 
     A-law log synchronous data 
     CVSD synchronous data 
     Paging parameter negotiation 
     Power control 
     Transparent synchronous data 
     Broadcast Encryption 
     Enhanced Data Rate ACL 2 Mbps mode 
     Enhanced Data Rate ACL 3 Mbps mode 
     Enhanced inquiry scan 
     Interlaced inquiry scan 
     Interlaced page scan 
     RSSI with inquiry results 
     Extended SCO link (EV3 packets) 
     AFH capable slave 
     AFH classification slave 
     LE Supported (Controller) 
     3-slot Enhanced Data Rate ACL packets 
     5-slot Enhanced Data Rate ACL packets 
     Sniff subrating 
     Pause encryption 
     AFH capable master 
     AFH classification master 
     Enhanced Data Rate eSCO 2 Mbps mode 
     Extended Inquiry Response 
     Simultaneous LE and BR/EDR (Controller) 
     Secure Simple Pairing 
     Encapsulated PDU 
     Non-flushable Packet Boundary Flag 
     Link Supervision Timeout Changed Event 
     Inquiry TX Power Level 
     Enhanced Power Control 
     Extended features 
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3   #12 [hci0] 5.438569 
    Handle: 11 
    Page: 1 
> ACL Data RX: Handle 11 flags 0x02 dlen 10   #13 [hci0] 5.438782 
    L2CAP: Information Request (0x0a) ident 3 len 2 
    Type: Fixed channels supported (0x0003) 
< ACL Data TX: Handle 11 flags 0x00 dlen 20   #14 [hci0] 5.438818 
    L2CAP: Information Response (0x0b) ident 3 len 12 
    Type: Fixed channels supported (0x0003) 
    Result: Success (0x0000) 
    Channels: 0x0000000000000006 
     L2CAP Signaling (BR/EDR) 
     Connectionless reception 
> HCI Event: Command Status (0x0f) plen 4   #15 [hci0] 5.440527 
    Read Remote Extended Features (0x01|0x001c) ncmd 1 
    Status: Success (0x00) 
> HCI Event: Number of Completed Packets (0x13) plen 5   #16 [hci0] 5.443529 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> HCI Event: Read Remote Extended Features (0x23) plen 13   #17 [hci0] 5.444528 
    Status: Success (0x00) 
    Handle: 11 
    Page: 1/1 
    Features: 0x0f 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
     Secure Simple Pairing (Host Support) 
     LE Supported (Host) 
     Simultaneous LE and BR/EDR (Host) 
     Secure Connections (Host Support) 
< HCI Command: Remote Name Request (0x01|0x0019) plen 10   #18 [hci0] 5.444573 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
    Page scan repetition mode: R2 (0x02) 
    Page scan mode: Mandatory (0x00) 
    Clock offset: 0x0000 
> HCI Event: Command Status (0x0f) plen 4   #19 [hci0] 5.445529 
    Remote Name Request (0x01|0x0019) ncmd 1 
    Status: Success (0x00) 
> HCI Event: Remote Name Req Complete (0x07) plen 255   #20 [hci0] 5.465535 
    Status: Success (0x00) 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
    Name: Moto E (4) 
< HCI Command: Authentication Requested (0x01|0x0011) plen 2   #21 [hci0] 5.465591 
    Handle: 11 
Device Connected: D4:63:C6:XX:XX:XX (0) flags 0x0000 
    0b 09 4d 6f 74 6f 20 45 20 28 34 29 04 0d 0c 02 ..Moto E (4).... 
    5a            Z 
> HCI Event: Command Status (0x0f) plen 4   #22 [hci0] 5.466545 
    Authentication Requested (0x01|0x0011) ncmd 1 
    Status: Success (0x00) 
> HCI Event: Link Key Request (0x17) plen 6   #23 [hci0] 5.467541 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22   #24 [hci0] 5.467588 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
    Link key: b0912a0c42db7615860023aa911d552b 
> HCI Event: Command Complete (0x0e) plen 10   #25 [hci0] 5.470540 
    Link Key Request Reply (0x01|0x000b) ncmd 1 
    Status: Success (0x00) 
    Address: D4:63:C6:XX:XX:XX (OUI D4-63-C6) 
> HCI Event: Auth Complete (0x06) plen 3   #26 [hci0] 5.489555 
    Status: Success (0x00) 
    Handle: 11 
< HCI Command: Set Connection Encryption (0x01|0x0013) plen 3   #27 [hci0] 5.489604 
    Handle: 11 
    Encryption: Enabled (0x01) 
> HCI Event: Command Status (0x0f) plen 4   #28 [hci0] 5.490550 
    Set Connection Encryption (0x01|0x0013) ncmd 1 
    Status: Success (0x00) 
> HCI Event: Encryption Change (0x08) plen 4   #29 [hci0] 5.532580 
    Status: Success (0x00) 
    Handle: 11 
    Encryption: Enabled with E0 (0x01) 
< ACL Data TX: Handle 11 flags 0x00 dlen 10   #30 [hci0] 5.532645 
    L2CAP: Information Request (0x0a) ident 1 len 2 
    Type: Extended features supported (0x0002) 
> ACL Data RX: Handle 11 flags 0x02 dlen 16   #31 [hci0] 5.562719 
    L2CAP: Information Response (0x0b) ident 1 len 8 
    Type: Extended features supported (0x0002) 
    Result: Success (0x0000) 
    Features: 0x000000b8 
     Enhanced Retransmission Mode 
     Streaming Mode 
     FCS Option 
     Fixed Channels 
< ACL Data TX: Handle 11 flags 0x00 dlen 10   #32 [hci0] 5.562780 
    L2CAP: Information Request (0x0a) ident 2 len 2 
    Type: Fixed channels supported (0x0003) 
> HCI Event: Number of Completed Packets (0x13) plen 5   #33 [hci0] 5.565591 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> ACL Data RX: Handle 11 flags 0x02 dlen 20   #34 [hci0] 5.566462 
    L2CAP: Information Response (0x0b) ident 2 len 12 
    Type: Fixed channels supported (0x0003) 
    Result: Success (0x0000) 
    Channels: 0x0000000000000082 
     L2CAP Signaling (BR/EDR) 
     Security Manager (BR/EDR) 
< ACL Data TX: Handle 11 flags 0x00 dlen 12   #35 [hci0] 5.566511 
    L2CAP: Connection Request (0x02) ident 3 len 4 
    PSM: 3 (0x0003) 
    Source CID: 64 
> ACL Data RX: Handle 11 flags 0x02 dlen 16   #36 [hci0] 5.570089 
    L2CAP: Connection Response (0x03) ident 3 len 8 
    Destination CID: 67 
    Source CID: 64 
    Result: Connection successful (0x0000) 
    Status: No further information available (0x0000) 
< ACL Data TX: Handle 11 flags 0x00 dlen 27   #37 [hci0] 5.570138 
    L2CAP: Configure Request (0x04) ident 4 len 19 
    Destination CID: 67 
    Flags: 0x0000 
    Option: Maximum Transmission Unit (0x01) [mandatory] 
     MTU: 1013 
    Option: Retransmission and Flow Control (0x04) [mandatory] 
     Mode: Basic (0x00) 
     TX window size: 0 
     Max transmit: 0 
     Retransmission timeout: 0 
     Monitor timeout: 0 
     Maximum PDU size: 0 
> ACL Data RX: Handle 11 flags 0x02 dlen 16   #38 [hci0] 5.571470 
    L2CAP: Configure Request (0x04) ident 4 len 8 
    Destination CID: 64 
    Flags: 0x0000 
    Option: Maximum Transmission Unit (0x01) [mandatory] 
     MTU: 1691 
< ACL Data TX: Handle 11 flags 0x00 dlen 18   #39 [hci0] 5.571521 
    L2CAP: Configure Response (0x05) ident 4 len 10 
    Source CID: 67 
    Flags: 0x0000 
    Result: Success (0x0000) 
    Option: Maximum Transmission Unit (0x01) [mandatory] 
     MTU: 1691 
> HCI Event: Number of Completed Packets (0x13) plen 5   #40 [hci0] 5.573594 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> ACL Data RX: Handle 11 flags 0x02 dlen 14   #41 [hci0] 5.573967 
    L2CAP: Configure Response (0x05) ident 4 len 6 
    Source CID: 64 
    Flags: 0x0000 
    Result: Success (0x0000) 
< ACL Data TX: Handle 11 flags 0x00 dlen 8   #42 [hci0] 5.574064 
    Channel: 67 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Set Async Balance Mode (SABM) (0x2f) 
    Address: 0x03 cr 1 dlci 0x00 
    Control: 0x3f poll/final 1 
    Length: 0 
    FCS: 0x1c 
> HCI Event: Number of Completed Packets (0x13) plen 5   #43 [hci0] 5.577595 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> ACL Data RX: Handle 11 flags 0x02 dlen 8   #44 [hci0] 5.577612 
    Channel: 64 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Ack (UA) (0x63) 
    Address: 0x03 cr 1 dlci 0x00 
    Control: 0x73 poll/final 1 
    Length: 0 
    FCS: 0xd7 
< ACL Data TX: Handle 11 flags 0x00 dlen 18   #45 [hci0] 5.577681 
    Channel: 67 len 14 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x03 cr 1 dlci 0x00 
    Control: 0xef poll/final 0 
    Length: 10 
    FCS: 0x70 
    MCC Message type: DLC Parameter Negotiation CMD (0x20) 
     Length: 8 
     dlci 12 frame_type 0 credit_flow 15 pri 7 
     ack_timer 0 frame_size 1008 max_retrans 0 credits 7 
> ACL Data RX: Handle 11 flags 0x02 dlen 18   #46 [hci0] 5.581473 
    Channel: 64 len 14 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x01 cr 0 dlci 0x00 
    Control: 0xef poll/final 0 
    Length: 10 
    FCS: 0xaa 
    MCC Message type: DLC Parameter Negotiation RSP (0x20) 
     Length: 8 
     dlci 12 frame_type 0 credit_flow 14 pri 7 
     ack_timer 0 frame_size 990 max_retrans 0 credits 7 
< ACL Data TX: Handle 11 flags 0x00 dlen 8   #47 [hci0] 5.581541 
    Channel: 67 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Set Async Balance Mode (SABM) (0x2f) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0x3f poll/final 1 
    Length: 0 
    FCS: 0x43 
> HCI Event: Number of Completed Packets (0x13) plen 5   #48 [hci0] 5.584597 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> ACL Data RX: Handle 11 flags 0x02 dlen 8   #49 [hci0] 5.585096 
    Channel: 64 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Ack (UA) (0x63) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0x73 poll/final 1 
    Length: 0 
    FCS: 0x88 
< ACL Data TX: Handle 11 flags 0x00 dlen 12   #50 [hci0] 5.585552 
    Channel: 67 len 8 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x03 cr 1 dlci 0x00 
    Control: 0xef poll/final 0 
    Length: 4 
    FCS: 0x70 
    MCC Message type: Modem Status Command CMD (0x38) 
     Length: 2 
     dlci 12 
     fc 0 rtc 1 rtr 1 ic 0 dv 1 
> ACL Data RX: Handle 11 flags 0x02 dlen 12   #51 [hci0] 5.591479 
    Channel: 64 len 8 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x01 cr 0 dlci 0x00 
    Control: 0xef poll/final 0 
    Length: 4 
    FCS: 0xaa 
    MCC Message type: Modem Status Command RSP (0x38) 
     Length: 2 
     dlci 12 
     fc 0 rtc 1 rtr 1 ic 0 dv 1 
> ACL Data RX: Handle 11 flags 0x02 dlen 12   #52 [hci0] 5.592601 
    Channel: 64 len 8 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x01 cr 0 dlci 0x00 
    Control: 0xef poll/final 0 
    Length: 4 
    FCS: 0xaa 
    MCC Message type: Modem Status Command CMD (0x38) 
     Length: 2 
     dlci 12 
     fc 0 rtc 1 rtr 1 ic 0 dv 1 
< ACL Data TX: Handle 11 flags 0x00 dlen 12   #53 [hci0] 5.592664 
    Channel: 67 len 8 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x03 cr 1 dlci 0x00 
    Control: 0xef poll/final 0 
    Length: 4 
    FCS: 0x70 
    MCC Message type: Modem Status Command RSP (0x38) 
     Length: 2 
     dlci 12 
     fc 0 rtc 1 rtr 1 ic 0 dv 1 
< ACL Data TX: Handle 11 flags 0x00 dlen 9   #54 [hci0] 5.592678 
    Channel: 67 len 5 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0xff poll/final 1 
    Length: 0 
    FCS: 0x53 
    Credits: 33 
    53            S 
< ACL Data TX: Handle 11 flags 0x00 dlen 15   #55 [hci0] 5.592688 
    Channel: 67 len 11 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0xef poll/final 0 
    Length: 7 
    FCS: 0x4f 
    80 00 07 10 00 04 00 4f       .......O 
> HCI Event: Number of Completed Packets (0x13) plen 5   #56 [hci0] 5.595604 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> HCI Event: Number of Completed Packets (0x13) plen 5   #57 [hci0] 5.598602 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> ACL Data RX: Handle 11 flags 0x02 dlen 21   #58 [hci0] 5.601479 
    Channel: 64 len 17 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x31 cr 0 dlci 0x0c 
    Control: 0xff poll/final 1 
    Length: 12 
    FCS: 0x89 
    Credits: 4 
    a0 00 0c 10 00 04 00 cb 00 00 00 01 89   ............. 
< ACL Data TX: Handle 11 flags 0x00 dlen 41   #59 [hci0] 5.601739 
    Channel: 67 len 37 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0xef poll/final 0 
    Length: 33 
    FCS: 0x4f 
    83 00 21 cb 00 00 00 01 42 00 19 78 2d 6f 62 65 ..!.....B..x-obe 
    78 2f 66 6f 6c 64 65 72 2d 6c 69 73 74 69 6e 67 x/folder-listing 
    00 4f           .O 
> ACL Data RX: Handle 11 flags 0x02 dlen 17   #60 [hci0] 5.612611 
    Channel: 64 len 13 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x31 cr 0 dlci 0x0c 
    Control: 0xff poll/final 1 
    Length: 8 
    FCS: 0x89 
    Credits: 1 
    d1 00 08 cb 00 00 00 01 89      ......... 
< ACL Data TX: Handle 11 flags 0x00 dlen 16   #61 [hci0] 5.613075 
    Channel: 67 len 12 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0xef poll/final 0 
    Length: 8 
    FCS: 0x4f 
    81 00 08 cb 00 00 00 01 4f      ........O 
> HCI Event: Number of Completed Packets (0x13) plen 5   #62 [hci0] 5.618623 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> ACL Data RX: Handle 11 flags 0x02 dlen 17   #63 [hci0] 5.623869 
    Channel: 64 len 13 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) 
    Address: 0x31 cr 0 dlci 0x0c 
    Control: 0xff poll/final 1 
    Length: 8 
    FCS: 0x89 
    Credits: 1 
    a0 00 08 cb 00 00 00 01 89      ......... 
< ACL Data TX: Handle 11 flags 0x00 dlen 8   #64 [hci0] 5.624057 
    Channel: 67 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Disconnect (DISC) (0x43) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0x53 poll/final 1 
    Length: 0 
    FCS: 0xa2 
> ACL Data RX: Handle 11 flags 0x02 dlen 8   #65 [hci0] 5.628872 
    Channel: 64 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Ack (UA) (0x63) 
    Address: 0x33 cr 1 dlci 0x0c 
    Control: 0x73 poll/final 1 
    Length: 0 
    FCS: 0x88 
< ACL Data TX: Handle 11 flags 0x00 dlen 8   #66 [hci0] 5.628967 
    Channel: 67 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Disconnect (DISC) (0x43) 
    Address: 0x03 cr 1 dlci 0x00 
    Control: 0x53 poll/final 1 
    Length: 0 
    FCS: 0xfd 
> HCI Event: Number of Completed Packets (0x13) plen 5   #67 [hci0] 5.632625 
    Num handles: 1 
    Handle: 11 
    Count: 2 
> ACL Data RX: Handle 11 flags 0x02 dlen 8   #68 [hci0] 5.632644 
    Channel: 64 len 4 [PSM 3 mode 0] {chan 0} 
    RFCOMM: Unnumbered Ack (UA) (0x63) 
    Address: 0x03 cr 1 dlci 0x00 
    Control: 0x73 poll/final 1 
    Length: 0 
    FCS: 0xd7 
< ACL Data TX: Handle 11 flags 0x00 dlen 12   #69 [hci0] 5.632733 
    L2CAP: Disconnection Request (0x06) ident 5 len 4 
    Destination CID: 67 
    Source CID: 64 
> ACL Data RX: Handle 11 flags 0x02 dlen 12   #70 [hci0] 5.637623 
    L2CAP: Disconnection Response (0x07) ident 5 len 4 
    Destination CID: 67 
    Source CID: 64 
> HCI Event: Number of Completed Packets (0x13) plen 5   #71 [hci0] 5.863739 
    Num handles: 1 
    Handle: 11 
    Count: 1 
< HCI Command: Disconnect (0x01|0x0006) plen 3   #72 [hci0] 7.631380 
    Handle: 11 
    Reason: Remote User Terminated Connection (0x13) 
> HCI Event: Command Status (0x0f) plen 4   #73 [hci0] 7.632590 
    Disconnect (0x01|0x0006) ncmd 1 
    Status: Success (0x00) 
> HCI Event: Disconnect Complete (0x05) plen 4   #74 [hci0] 7.727640 
    Status: Success (0x00) 
    Handle: 11 
    Reason: Connection Terminated By Local Host (0x16) 
Device Disconnected: D4:63:C6:XX:XX:XX (0) reason 2 

答えて

0

多くのさまざまなことを試し続けた後、私はこれが問題を抱えているAndroidデバイスよりも多い可能性があることを認識しました。解決方法は、obexftp -lまたはobexfsを利用するために、AndroidデバイスがFTPサービスを実行する必要があることです。私はこれを、AndroidデバイスにES File Explorerをインストールし、[ネットワーク]タブで[Bluetooth]を選択することで実現しました。これにより、Bluetoothチャネル20でObex FTPパスが開きます。以下のコードは機能します。 obexfsだけでなく、

obexftp -b D4:63:C6:XX:XX:XX -B 20 -U none -l 
関連する問題