2012-05-11 18 views
-2

私はZend Frameworkで新しいプロジェクトを作成しました。インデックスコントローラを実行すると実行されますが、新しいコントローラを実行すると機能しません。要求URLがzendフレームワークで見つかりません

返されるもの: リクエストURL/MyProject/quickstart/public/mycontroller /がこのサーバー上に見つかりませんでした。

これは私のapache2.confファイルです

# 
# Based upon the NCSA server configuration files originally by Rob McCool. 
# 
# This is the main Apache server configuration file. It contains the 
# configuration directives that give the server its instructions. 
# See http://httpd.apache.org/docs/2.2/ for detailed information about 
# the directives. 
# 
# Do NOT simply read the instructions in here without understanding 
# what they do. They're here only as hints or reminders. If you are unsure 
# consult the online docs. You have been warned. 
# 
# The configuration directives are grouped into three basic sections: 
# 1. Directives that control the operation of the Apache server process as a 
#  whole (the 'global environment'). 
# 2. Directives that define the parameters of the 'main' or 'default' server, 
#  which responds to requests that aren't handled by a virtual host. 
#  These directives also provide default values for the settings 
#  of all virtual hosts. 
# 3. Settings for virtual hosts, which allow Web requests to be sent to 
#  different IP addresses or hostnames and have them handled by the 
#  same Apache server process. 
# 
# Configuration and logfile names: If the filenames you specify for many 
# of the server's control files begin with "/" (or "drive:/" for Win32), the 
# server will use that explicit path. If the filenames do *not* begin 
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" 
# with ServerRoot set to "" will be interpreted by the 
# server as "//var/log/apache2/foo.log". 
# 

### Section 1: Global Environment 
# 
# The directives in this section affect the overall operation of Apache, 
# such as the number of concurrent requests it can handle or where it 
# can find its configuration files. 
# 

# 
# ServerRoot: The top of the directory tree under which the server's 
# configuration, error, and log files are kept. 
# 
# NOTE! If you intend to place this on an NFS (or otherwise network) 
# mounted filesystem then please read the LockFile documentation (available 
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); 
# you will save yourself a lot of trouble. 
# 
# Do NOT add a slash at the end of the directory path. 
# 
ServerRoot "/etc/apache2" 

# 
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. 
# 
#<IfModule !mpm_winnt.c> 
#<IfModule !mpm_netware.c> 
LockFile /var/lock/apache2/accept.lock 
#</IfModule> 
#</IfModule> 

# 
# PidFile: The file in which the server should record its process 
# identification number when it starts. 
# This needs to be set in /etc/apache2/envvars 
# 
PidFile ${APACHE_PID_FILE} 

# 
# Timeout: The number of seconds before receives and sends time out. 
# 
Timeout 300 

# 
# KeepAlive: Whether or not to allow persistent connections (more than 
# one request per connection). Set to "Off" to deactivate. 
# 
KeepAlive On 

# 
# MaxKeepAliveRequests: The maximum number of requests to allow 
# during a persistent connection. Set to 0 to allow an unlimited amount. 
# We recommend you leave this number high, for maximum performance. 
# 
MaxKeepAliveRequests 100 

# 
# KeepAliveTimeout: Number of seconds to wait for the next request from the 
# same client on the same connection. 
# 
KeepAliveTimeout 15 

## 
## Server-Pool Size Regulation (MPM specific) 
## 

# prefork MPM 
# StartServers: number of server processes to start 
# MinSpareServers: minimum number of server processes which are kept spare 
# MaxSpareServers: maximum number of server processes which are kept spare 
# MaxClients: maximum number of server processes allowed to start 
# MaxRequestsPerChild: maximum number of requests a server process serves 
<IfModule mpm_prefork_module> 
    StartServers   5 
    MinSpareServers  5 
    MaxSpareServers  10 
    MaxClients   150 
    MaxRequestsPerChild 0 
</IfModule> 

# worker MPM 
# StartServers: initial number of server processes to start 
# MaxClients: maximum number of simultaneous client connections 
# MinSpareThreads: minimum number of worker threads which are kept spare 
# MaxSpareThreads: maximum number of worker threads which are kept spare 
# ThreadsPerChild: constant number of worker threads in each server process 
# MaxRequestsPerChild: maximum number of requests a server process serves 
<IfModule mpm_worker_module> 
    StartServers   2 
    MinSpareThreads  25 
    MaxSpareThreads  75 
    ThreadLimit   64 
    ThreadsPerChild  25 
    MaxClients   150 
    MaxRequestsPerChild 0 
</IfModule> 

# event MPM 
# StartServers: initial number of server processes to start 
# MaxClients: maximum number of simultaneous client connections 
# MinSpareThreads: minimum number of worker threads which are kept spare 
# MaxSpareThreads: maximum number of worker threads which are kept spare 
# ThreadsPerChild: constant number of worker threads in each server process 
# MaxRequestsPerChild: maximum number of requests a server process serves 
<IfModule mpm_event_module> 
    StartServers   2 
    MaxClients   150 
    MinSpareThreads  25 
    MaxSpareThreads  75 
    ThreadLimit   64 
    ThreadsPerChild  25 
    MaxRequestsPerChild 0 
</IfModule> 

# These need to be set in /etc/apache2/envvars 
User ${APACHE_RUN_USER} 
Group ${APACHE_RUN_GROUP} 

# 
# AccessFileName: The name of the file to look for in each directory 
# for additional configuration directives. See also the AllowOverride 
# directive. 
# 

AccessFileName .htaccess 


# 
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
# 
<Files ~ "^\.ht"> 
    Order allow,deny 
    Deny from all 
    Satisfy all 
</Files> 

# 
# DefaultType is the default MIME type the server will use for a document 
# if it cannot otherwise determine one, such as from filename extensions. 
# If your server contains mostly text or HTML documents, "text/plain" is 
# a good value. If most of your content is binary, such as applications 
# or images, you may want to use "application/octet-stream" instead to 
# keep browsers from trying to display binary files as though they are 
# text. 
# 
DefaultType text/plain 


# 
# HostnameLookups: Log the names of clients or just their IP addresses 
# e.g., www.apache.org (on) or 204.62.129.132 (off). 
# The default is off because it'd be overall better for the net if people 
# had to knowingly turn this feature on, since enabling it means that 
# each client request will result in AT LEAST one lookup request to the 
# nameserver. 
# 
HostnameLookups Off 

# ErrorLog: The location of the error log file. 
# If you do not specify an ErrorLog directive within a <VirtualHost> 
# container, error messages relating to that virtual host will be 
# logged here. If you *do* define an error logfile for a <VirtualHost> 
# container, that host's errors will be logged there and not here. 
# 
ErrorLog /var/log/apache2/error.log 

# 
# LogLevel: Control the number of messages logged to the error_log. 
# Possible values include: debug, info, notice, warn, error, crit, 
# alert, emerg. 
# 
LogLevel warn 

# Include module configuration: 
Include /etc/apache2/mods-enabled/*.load 
Include /etc/apache2/mods-enabled/*.conf 

# Include all the user configurations: 
Include /etc/apache2/httpd.conf 

# Include ports listing 
Include /etc/apache2/ports.conf 

# 
# The following directives define some format nicknames for use with 
# a CustomLog directive (see below). 
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i 
# 
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined 
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined 
LogFormat "%h %l %u %t \"%r\" %>s %O" common 
LogFormat "%{Referer}i -> %U" referer 
LogFormat "%{User-agent}i" agent 

# 
# Define an access log for VirtualHosts that don't define their own logfile 
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined 


# Include of directories ignores editors' and dpkg's backup files, 
# see README.Debian for details. 

# Include generic snippets of statements 
Include /etc/apache2/conf.d/ 

# Include the virtual host configurations: 
Include /etc/apache2/sites-enabled/ 

<VirtualHost *:80> 
    DocumentRoot "/var/www/MyProject/quickstart/public" 

<Directory "/var/www/MyProject/quickstart/public"> 
    Options Indexes MultiViews FollowSymLinks 
    AllowOverride All 
    Order allow,deny 
    Allow from all 
</Directory> 

</VirtualHost> 

これは私の.htaccessファイルです:

RewriteEngine On 
RewriteCond %{REQUEST_FILENAME} -s [OR] 
RewriteCond %{REQUEST_FILENAME} -l [OR] 
RewriteCond %{REQUEST_FILENAME} -d 
RewriteRule ^.*$ - [NC,L] 
RewriteRule ^.*$ index.php [NC,L] 

任意の提案? apache.confで

[MY SOLUTION] この行を追加し

のDirectoryIndex index.phpの AllowOverrideのすべての 注文ができるように、 はすべて

+0

コントローラーの名前は何ですか?また、それは公共のために探しているように見えます - publicは、通常、あなたのconfファイルに基づいて、http:// localhost/mycontrollerになるように、htmlとindex.phpにあるファイルの名前です。 – shrikeh

答えて

2

から許可、拒否、公開中.htaccessファイルを作成します。プロジェクトの構造がわからないのですが、Zend Frameworkのデフォルトの設定です:

RewriteEngine On 
RewriteCond %{REQUEST_FILENAME} -s [OR] 
RewriteCond %{REQUEST_FILENAME} -l [OR] 
RewriteCond %{REQUEST_FILENAME} -d 
RewriteRule ^.*$ - [NC,L] 
RewriteRule ^.*$ index.php [NC,L] 
+0

私は、仕事 – Dany

関連する問題